Water Injection Cartridge Filter for Oil Industry

• Customization: Available
• Material: Chemical Fiber
• Application: Industry
• Model NO.: MFF/DLOF
• Type: Pleated
• Filter Connector: 222 Connector
• Filtration Grade: PRE Filter
• Removal Rating: 1/2/5/10/20/50 Um
• End Cap Type: DOE,222/Flat
• Media: PP/Glass Fiber/Pet
• Outside Diameter: 64/66/69mm
• Transport Package: Carton
• Specification: 30-40"
• Trademark: Darlly
• Origin: Cn
• HS Code: 84219990
• Production Capacity: 20000PCS/Month

Product Description

Product Description
MFF series pleated filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high quality fibres. The combonation of surface and depth filtration provides a long lifetime. Due touse of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, less work changing the cartridges and less waste.

Features
Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
Low cost because of large filter area and reduces labor costs to change.

Specifications
 

Filter media	PP, PET, glass fiber
End cap material	PP, ABS
Center core	PP, ABS
Netting	PE
Seal material	Silicone, EPDM, NBR
END cAP types	DOE, 226/flat end
Length	10'', 20'', 30'', 40''
Outside diameter	69mm
Inside diameter	28mm
Removal ratings	1μm, 2μm, 5μm, 10μm, 20μm, 50μm

Operating pressure and temperature	The pleated cartridge construction will withstand differential pressures up to 60psi(4bar) at ambient temperature
The optimum changeout differential pressure	35psi(2.5 bar) up to 52ºC
Service condition	500kpa(5bar) by 20temperature 300kpa(3bar) by 65temperature