Type: | Lenticular Filter Housing |
---|---|
Usage: | Environmental Protection |
Motive Force: | Pressure |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Depth-Stack Sanitary Filter Housings are a new type of depth-stack filter housing. Designed to meet requirements for sanitary construction with smooth crevice-free welding and TC-type sanitary connections.
Easy to clean and disassemble.
The co-linear inlet and outlet flow paths beneath the vessel shell serve to minimize liquid turbulence.
Available for 8", 12" and 16" diameter cartridges up to four high modules to meet high flow rates requirements.
·Ultra-high degree of polishing: Internal: Ra≤0.3μm ;External: R a≤0.4μm
·Liquid turbulence is minimized with co-linear inlet-outlet porting beneath the housing shell.
·Specially designed drain valves can optionally be installed on the inlet and outlet ports for easy liquid drainage.
·Allows vertical stacking of up to four depth-stack cartridges and provides high flow rates at high retention efficiency.
·Segmented cartridge design makes it more convenient to replace depth-stack cartridges and helps to reduce liquid loss.
Finish Process Options:Passivated,Electropolished,Mech. Polished
Polish Quality:Internal: Ra≤0.3μm;External: Ra≤0.4μm
Shell Options:304 or 316L Stainless Steel
Vent Valve:304 or 316L
Eyebolts:304
Legs:304
Seal Materials:Silicone, FKM, EPDM
304 or 316L Stainless Steel
Pharmaceuticals: filtration of injectables, LVPs, water for injection, and other biological products
Food and beverage: filtration of beer, wine, and distilled spirits, juices, syrups, and edible oils
Chemical industry: filtration of grease and dirt, sludge, and gelatinous materials
Technical Specification
Connenction of shell | Flange |
N1,N2 In-outlet | Flange, Tri-clamp, Thread |
N3 Pressure gauge (option) | 1.5" Tri-clamp |
N4 Drain valve (option) | 1" Tri-clamp |
N5 Vent valve (option) | 1/2" Tri-clamp |
Finish type | Mechanical |
Polishing precision | 0.3μm Inner surface Ra≤0.6μm |
0.4μm Outside surface Ra≤0.8μm | |
Max Operating pressure | 0.6Mpa |
Max Operating temperature | 150°C |
Online or steam sterilization | 121°C / 30min |
Dimension Parameters
Ordering Information
Suppliers with verified business licenses