PTFE pleated filter cartridges
Product synopsis
PTFE series is constructed of imported natural hydrophobic Polytetrafluoroethylene membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Features
-- Excellent performance of high temperature-resistance, repeat steamability in situ.
-- Hydrophobic membrane with high flow.
-- Low pressure drop, high flow rate, long service life
-- 100% integrity tested
-- Non fiber-releasing
Applications
-- Fermentation tank,
-- Vent filter of hold tank.
-- Electronic industry
-- Semiconductor: Ultrapure gas filtration
-- Chemical industry
Specifications
| Removal rating |
For liquid: 0.2μm, 0.22μm, 0.45μm;
for gas: 0.01μm, 0.02μm |
| Length |
10", 20", 30", 40" |
| Outside diameter |
69mm |
| Maximum operating temperature |
90°C |
| Maximum operating pressure |
4.2 bar @25°C |
| Maximum operating pressure(Reverse Direction) |
2.0 bar @25°C |
| Maximum temperature sterilization |
121°C every 30 minutes, 100 times |
When filter the air, pressure is 2 bar, start pressure 100Mbar, 10"filter can flow 300NM³ /h
Order Information
For example:
DLMPTFE-0022-10-II-V
PTFE, Rating: 0.22um, Length: 10", DOE, seal material: Viton
| Media |
PTFE |
| Length |
10", 20", 30", 40" |
| Removal rating: For liquid: |
0.2μm, 0.22μm, 0.45μm, for gas: 0.01μm, 0.02μm |
Audited Supplier 
){kind=link}
){kind=link}