Darlly Oil Filter Oil Filter Element Membrane Filter Cartridge

• Usage: Liquid Filter
• Transport Package: Cartons
• Trademark: Darlly
• Origin: Made in China

Product Description

Darlly oil filter oil filter element membrane filter cartridge

<sub>General  Description:
MFF Series Pleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high quality fibers. The combination of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirt-holding capacity. Long cartridge lifetime means lower operational consumable costs, Less work changing the cartridges and less waste.

Applications:


Features:</sub>
- <sub>Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
- Low cost because of large filter area and reduces labor costs to change 


Specifications:

Dimensions
- Outside Diameter:69mm
- Inside Diameter:28mm
- Length:10",20",30",40"

Material Of Constructions
- Filter Media: PP,PET, Glass Fiber
- End Cap Material: PP , ABS
- Center Core: PP, ABS
- Netting: PE
- Seal Material: Silicone, EPDM, NBR, VitonEnd Cap Types:DOE,-226/Flat End

Performance
- Removal Rating: 1μm,2μm,5μm,10μm,20μm,50μm
- Operating Pressure and temperature:
- The pleated cartridge construction will withstand differential
- Pressures up to 60 PSI(4Bar) at ambient temperature.
- The optimum changeout differential pressure is 35psi(2.5Bar) up to 52° C.
- Service condition:
- 500KPa(5Bar)by 20° C
- 300KPa(3Bar)by 65° C</sub>

Code*	Removal Rating	Code=	Length	Code#	Media	Code+	Seal Material	Code&	Code
1	1µm	10	10"	PP	Polypropylene	S	Silicone	F	DOE
2	2µm	20	20"	GF	Glass Fiber	E	EPDM	T	222/Flat End
5	5µm	30	30"	PET	Polyester	B	NBR
10	10µm	40	40"			V	Viton
20	20µm
50	50µm