Darlly High Flow Filtration System Filter Housing Corrosion Resistant FRP Pressure Vessels

Product Description

Darlly High Flow Filtration system are styled on the design of corrosion resistant FRP pressure vessels. These provide considerable reduction in capital investment versus stainless steel construction and make use of a quick-acting closure. Each vessel has the convenience of one filter element that can be exchanged in seconds.

High Flow filter elements are available in both polypropylene and glass micro-fiber media in ratings of 0.5 to 100 microns, and in both nominal and absolute retention performance. The unique layered construction provides excellent retention across a wide range of flow rates. Each six inch diameter 60" length cartridge can handle flow rates of up to 500gpm with the inside-to-outside flow path allowing for high contaminant holding capacity. Superior flow and long filter life make Darlly HighFlow filters an ideal choice for a wide variety of critical process filtration applications.

The innovation of advanced German pleating technology allows the filter elements to offer higher surface area resulting in superior flow and media utilization. With a tapered pore structure and fine fiber denier, the result is better dirt holding capacity, low resistance to flow, superior filter performance and overall better value for the user.

The inside-to-outside flow configuration and core-less construction of the Darlly High Flow filter element allows it to be tightly compacted to minimize disposal costs. Maintenance requirements and production downtime is dramatically reduced in comparison with conventional depth filters. Service personal will find it easy & convenient remove used elements since all solid contamination is trapped inside of the filter cavity.


HIGH FLOW FILTER HOUSINGS
 

FEATURES				ADVANTAGES
FRP - GRP housings				Superior chemical compatibility
				Can withstand higher pressures
				Ideal solution for highly saline water
				Lower weight of individual housings allow ease of handling
High Flow Housing Capability versus Conventional Filter Housings				Saves time during routine servicing
				Filter sealing risks can be avoided
				Less individual cartridge seal points, reduces chance of fluid bypass
				No awkward davit arm or pulley mechanism to deal with to open the unit
IMP- Replacements & Damages				Smaller housing minimizes capital expense requirements
				Reduces system footprint
Ease of Use versus conventional Cartridge Filter Housings				No davit arm or tie rod issues to deal with
				Easy to set-up by-pass flow connections
Capacity Scaling				Additional housings can be added in parallel to scale-up orscale-down the system flow rate. No need to replace the mounting skid.
Reducing capacity				Remove Victaulic clamps and put the blind
Flexible Design Porting				Ports can be oriented at the installer's preferred orientation for maximum flexibility
Victaulic grooved ends				Easy to connect and disconnect with our standard Victaulic style grooved ends
Corrosion-Free Construction				Totally corrosion-free system, so critically important in cases of highly saline SWRO plants

SPECIFICATION
Model	Nominal Diameter	Material	Inlet & Outlet Orientation	Inlet/Outlet Size	Maximum Recommended Flow Rate(m³/h)	Maximum Temperature	Maximum Pressure
DL80-150S-20	8"	FRP	SIDE PORT	3"	15-25	70ºC	150psi
DL80-150S-40	8"	FRP	SIDE PORT	3"	30-60	70ºC	150psi
DL80-150S-60	8"	FRP	SIDE PORT	3"	50-110	70ºC	150psi

  

APPLICATION
Desalination Systems Municipal Water Industrial				SWRO & BWRO System Pre-filtration
Water				Process Water / Wastewater & Reclaimed Waters
Irrigation				Storage tanks for Landscaping Sprinklers
Food & Beverage				Pre-filtration or Polishing Filtration
Oil & Gas				Oil/Gas well Injection & Produced Water
Chemicals & Petrochemicals Automobile Finishing				Amine Sweetening
Electronics Manufacturing				Manufacturing of ICs, Memory Drives

HIGH FLOW FILTER CARTRIDGES
 

FEATURES				ADVANTAGES
High Flow Capacity per Cartridge (vs. Conventional 2.5" Diameter Cartridges)				Less cartridges are required, therefore:
				- Reduced cartridge handling time, storage space, inventory value, & disposal costs
				- Reduced filter change-out time
				- Fewer cartridge sealing points, reduced chance of fluid bypass
Advanced Pleat Design using Darlly High Grade Microfiber Polypropylene Media				High Dirt Holding capacity
				Superior chemical compatibility
Compact Design				Smaller housing envelope minimizes capital expense requirements
				Reduces system footprint
Easy to Operate				Minimum removal tools are required for filter change-out
				Push-to-Seat cartridge sealing mechanism provides positive seal
				Easy to install design handle facilitates cartridge installation and removal
Safe Materials of Construction Compliant with US FDA CFR-21 Requirements				Compatible in applications requiring direct food contact in food, beverage, & potable water processing

SPECIFICATION
CARTRIDGE DIMENSIONS
Outside Diameter				154mm
Length				20" (528mm), 40" (1022mm), 60" (1538mm)
CONSTRUCTION
Micron Ratings				0.5, 1, 3, 5, 10, 20, 40, 70, 100
Filter media, end caps, outer sleeve				Polypropylene, Glass fiber
Sealing o-ring options				Silicone, EPDM, FKM, E-FKM
OPERATING CONDITIONS
Maximum recommended flow rate in water (@20° C)				50m³/h for 40" filter
Maximum continuous operating temperature				70°C
Maximum hot water sanitisation temperature				90°C
Maximum forward differential pressure				2.4bar @ 20°C
Recommended change-out differential pressure				2.2bar @ 20°C

ODERING INFORMATION

Company Profile

FAQ

1. Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer of all kinds of filter cartridges, housings and filtration systems. We provide you the total filtration solutions with our 25 years experience in the industry. Thanks for finding us here.

2. Q: May I have samples?
A: Sure, of course. Sample cost can be refunded if you place formal orders in the future.

3. Q: Can you make customized products?
A: Yes, of course if you can provide us detailed specifications or drawings. Our mission is make customer idea on the products and provide the customer satisfied solutions.

4. Q: Can I use our own designed package?
A: Yes, size, color, logo and packaging style all can be customized.

5. Q: What's your MOQ?
A: Normally, 500 PCS/item. Any trial order which is less than MOQ is warmly welcomed. If you have a trial order, please feel free to contact us so that we can make some shipping recommendation for you to save the cost based on the quantity you need.

6. Q: I am a small business owner, Can I buy from you?
A: Yes, you are warmly welcomed. To grow with our customer is our goal. We would like to grow with you together.

7. Q: What is your general lead time?
A: Normally 5-7working days for off-the-shelf samples and 20-25 days for bulk production.

8. Q: What certificate do you have?
A: Our factory is ISO9001/ISO14000/OHSAS18000 certified. We have NSF, CE, Halal etc certificate for the products we are manufacturing.

9:Q: How should I place an order?
A: Please kindly click"Contact now" or "Chat with supplier", Then our sales engineer will recommend you suitable products for your selection also give some valuable suggestion for your selection.

10:Q: Since you are famous, can I be your agent?
A: Welcome to join us, we are happy to have a further discussion with you. Let's work together to make the world cleaner, safer and more productive.