Product Details
Specifications
Quick Flowment Filter Cartridge:
1.Support/drainage:polypropylene(pp
2.End caps:glass polypropylene(pp)
Darlly Quick Flowment Filter Cartridges
General Description
Quick-Flowment Filter Cartridges is a new product developed by darlly filter equipment Co.in Hangzhou china based on new market requirements.its target market is 4G to 8G LCD processing,and can be used to similar applications too.the large diameter with big filter area insures to reduce the number of filter cartridges and the dimension of housing requied.the long sercive life and high flow rate result in low investment and less manpower in many applications.
The cartridge has two kinds of configurations:83mm diameter,-226 double O-ring:131mm diameter,-334 single O-ring.
There are four filter media types:PP (pleated,melt blown),PES membrane,PTFE membrane,hydrop-hilic PTFE membrane.
Technical Specificatios
Materials of components
*Filter media:pleated depth polypropylene(pp),or melt blown pp;hydrophilic PES membrane;PTFE membrane;hydrophilic PTFE membrane
*Support/drainage:polypropylene(pp)
*End caps:glass polypropylene(pp)
*O-ring seal:EPDM,FEP encapsulated viton,silicone
Removal ratings
*Pp:0.1μm,0.22μm,0.45μm,0.5μm,1μm,1.2μm,3μm,5μm,10μm,20μm,50μm
*PES:0.22μm,0.45μm,1.2μm
*PTFE:0.22μm,0.5μm,1μm,3μm,10μm
*Hydrophilic PTFE:0.5μm,1μm,3μm,10μm
Dimensions
*Outside diameter:83mm.131mm
*Length:10inch(251mm),about 260mm including O-ring adaptor
Operating conditions
*Maximum operating temperature: melt blown pp:65°C;others:80°C
*Maximum differential pressure:melt blown:1.03bar at 65°C;others:4.0bar at 20°C;3.0bar at 65°C
*Recommended change out differential pressure:2.0bar at 20°C
Part numbers/ordering information
Darlly quick-flowment filter cartridge P/N:
DLQF* #= +(e.g.,DLQF83PP20E)
Code* cartridge type
83 diameter 83mm,-226 double o-ring
131 diameter 131mm,-334 single o-ring
Code# media type
PP PP PLEATED
PM PP MELT BLOWN
PES PES
PTFE PTFE
WPTFE HYDROPHILIC PTFE
Code+ o-ring material
E EPDM
FV FEP ENCAPSULATED VITON
S SILICONE
code= rating
0.1 0.1μm
0.22 0.22μm
0.45 0.45μm
0.5 0.5μm
1 1μm
1.2 1.2μm
3 3μm
5 5μm
10 10μm
20 20μm
50 50μm
Outside Diameter: |
83mm or 115mm |
| Length: |
10'' |
| Filter media: |
PP/PES/PTFE |
| Support Layer/Cage/Core/ End caps : |
Polypropylene (PP) |
| Seal Material : |
Silicone,EPDM,NBR,Vilton,Teflon,E-FKM |
| Removal Rating: |
0.1um,0.22um,0.45um,0.5um,0.8um,1.2um |
| Maximum Operating Temperature |
8 0°C |
| Maximum Differential Pressure : |
4.0Bar@25°C |
| Maximum Differential Pressure(Reverse Direction): |
2.0Bar,25°C |
| Maximum temperature sterilization : |
5times, 20minutes cycles at 120°C |
){kind=link}