Fluoropolymer Filter Cartridges Hydrophobic PTFE 30nm-5um Support SIP

• Material: Hydrophobic PTFE
• Application: Industry, Food and Beverage, Medicine
• Type: All Fluoropolymer Filter
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BTF
• Filter Connector: 222/226
• Media: Hydrophobic PTFE
• Support Layers: PFA/PTFE
• Cage/Core/End Caps: PFA
• Seal Material Options: E-FKM
• Max. Temperature: 160° C (320° F)
• SIP: 135°c (275°f) @ 30 Minutes Recommended
• Transport Package: Carton
• Trademark: Darlly
• Origin: Hangzhou
• HS Code: 84219990
• Package Size: 7.80cm * 7.80cm * 33.80cm
• Package Gross Weight: 0.200kg

Product Description

 

Product Description

BTF Series Filter Cartridges are constructed of hydrophobic polytetrafluoroethylene (PTFE) membrane, PTFE support netting, and ultra-pure perfluoroalkyl (PFA) hardware.
This provides the ultimate in chemical compatibility, durability, and extraordinarily low extractables. And furthermore provides high retention efficiency and long service life with aggressive chemicals.

Features

·Ultimate chemical compatibility.
·100% integrity tested.
·High flow rate with low pressure drop.

Applications

·Pharmaceutical products
·Solvents, strong acids & bases
·Microelectronic process fluids
·Chemically aggressive fluids
·Fine chemicals

Operating conditions

OD: 69mm (2.72") OD & 83mm (3.3") OD
Length: 10", 20", 30", 40" 83mm OD available only in 10" length

Filtration Area
HP: 1.12m2/69-10" 1.63m2/83-10"
EP:  0.9m2/69-10" 1.51m2/83-10"

·Individually tested for integrity.
·Filter cartridges are manufactured in a clean room environment using Good Manufacturing Practices ander 
ISO9001:2015 registered Quality Management System.
·Cartridges are individually serialized and have full materials traceability.
·PTFE membrane is naturally hydrophobic. If used with high surface tension fluids, such as aqueous solutions, it's necessary to pre-wet the filter cartridge. Alternatively, specify a pre-wetted cartridge.
·Pre-wetted cartridges are shipped in a solution of preserved ultrapure water. At the time of installation, drain the liquid and rinse the filter with 20L (per 10" unit) ultrapure water or service fluid before use.
·If pre-wetting is required, soak the cartridge in an aqueous solution of 60% isopropanol (IPA) for 10 minutes. Remove cartridge from the IPA and soak in ultrapure water for 10 minutes. Or, rinse for 10 minutes at 7.5 LPM per 10" length. The cartridge is now ready for service.